X-Band Squintless Horn Antenna Array (96 elements)
文章來源: 互聯網 錄入: mweda.com
Reutech Radar Systems (Pty) Ltd recently required a new antenna for an X-Band radar system and the design of a full plank of the receive antenna was performed using CST MICROWAVE STUDIO® (CST MWS). Typical design requirements have been vertical polarisation, 70º elevation beamwidth, 1º azimuth beamwidth with 30dB sidelobe levels, no squint and 20% operating bandwidth. The first two requirements are met by using a small E-plane sectoral horn shown in figure 1.
Figure 1: E-Plane horn
The azimuth properties of the antenna must be met by the design of the antenna feed. A 12-way squintless wideband waveguide E-plane divider section (see figure 2), based on a feed described by A Rogers [1], has been used as building block for the feed.
Figure 2: E-plane divider building block
An impedance transformer and 90º waveguide twist section are required to match the feed to the E-plane sectoral horn radiator. A machineable waveguide twist section consisting of L-shaped waveguide, similar to that published by Lenzing and Gans [2], is used to change the polarization from horizontal to vertical.
Figure 3: Twisted waveguide section
To evaluate the design approach, a prototype sub-antenna consisting of a 12-way feed, twist sections and E-plane horns was manufactured from Aluminium using CNC-machining and wire-cutting. The gain patterns were measured in the anechoic chamber at Stellenbosch University and are in good agreement with the expected results given by CST MICROWAVE STUDIO®.
Figure 4: Manufactured 12-element antenna
The design was then extended to a 2.4 meter full antenna plank with 96 radiating elements. For the excitation distribution the 96 elements were divided into 16 banks with a Villeneuve distribution. Each of the banks contains 6 elements with a linear excitation distribution. Such a distribution allows for the reuse of 6-way E-plane dividers throughout the antenna feed.
Figure 5: Full antenna blank with 96 radiating elements
The final feed consists of four levels of 3-port E-plane dividers connected with standard X-band waveguide. Since the feed structure is symmetrical, in a first step only half of the feed was analysed in CST MICROWAVE STUDIO®.
Figure 6: CST MWS model of one-half of full antenna bank
Figure 7: Magnitude of frequency response (half design)
Figure 8: Phase variation between channels (half design)
The complete antenna (with 96 ports excited at the same time) was also analysed in CST MICROWAVE STUDIO®, giving the following azimuth gain patterns.
Figure 9: Excitation and phase pattern used for the 96 elements
Figure 10: Azimuth patterns from full plank CST MWS analysis
The full antenna plank was manufactured and the radiation patterns were measured at the compact range at the University of Pretoria.
Figure 11: Compact range measurement setup at University of Pretoria
Figure 12: Measured azimuth pattern
Figure 13: Measured azimuth pattern
The azimuth radiation patterns show that no side-lobes higher than –30dB are measured outside ±20º from the main lobe. Some larger close-in side-lobes exist, which can be seen more clearly in figure 13. The highest side-lobe level is measured as –23dB at 10GHz. The 3dB beam-widths of the azimuth patterns vary from 1.2 to 0.8º over the frequency range. This corresponds very well with the expected results.
References
[1] A Rogers, “Wideband Squintless Linear Arrays”, The Marconi Review, Volume XXXV, Number 187, Fourth Quarter 1972, pp 221 – 243.
[2] H. F. Lenzing, M. J. Gans, “Machined Waveguide Twist”, IEEE Trans. MTT, Vol. 38, no. 7, July 1990, pp. 942 – 944.
X-Band_Squintless_Horn_Antenna_Array_(96_elements).pdf
(2008-03-17 21:30:18, Size: 573 KB, Downloads: 52)
微波EDA (m.youglowmentor.com) 網友回復:
-
網友回復
進來了!學習了!
當然要頂一下!謝謝分享!
申明:網友回復良莠不齊,僅供參考。如需專業解答,推薦學習李明洋老師的CST培訓視頻,或咨詢本站專家。
-
CST中文視頻教程,資深專家講解,視頻操作演示,從基礎講起,循序漸進,并結合最新工程案例,幫您快速學習掌握CST的設計應用...【詳細介紹】
推薦課程
-
7套中文視頻教程,2本教材,樣樣經典
-
國內最權威、經典的ADS培訓教程套裝
-
最全面的微波射頻仿真設計培訓合集
-
Ansoft Designer 學習培訓課程套裝
首套Ansoft Designer中文培訓教材
-
矢網,頻譜儀,信號源...,樣樣精通
-
與業界連接緊密的課程,學以致用...
-
Les Besser射頻培訓經典原版視頻
業界大牛Les Besser的培訓課程...
-
PCB設計學習培訓課程套裝
Allegro,PADS,PCB設計,其實很簡單..
-
Hyperlynx,SIwave,助你解決SI問題
-
現場講授,實時交流,工作學習兩不誤